GO-1088MGW (0.125s/60°, 74kg.cm)

Artikelnummer: KAV20.1088MGW
GTIN: 8596450068308
Kategorie: Servos
Hersteller: Kavan

Super high torque/high speed waterproof programmable digital standard brushless 85g servo with a magnetic encoder, hardened steel gears and wide input voltage range 4.8-8.4V, 4xBB, ideal for large/giant aircraft, 1:8-1:5 off-road RC cars, boats, sailboats etc. Torque 45.0kg.cm, speed 0.190s/60° at 4.8V, torque 55.0kg.cm, speed 0.165s/60° at 6.0V, torque 65.0kg.cm, speed 0.135s/60° at 7.4V, torque 74.0kg.cm, speed 0.125s/60° at 8.4V. Waterproof/dustproof (IP67) aluminium case for perfect cooling under high load and thorough protection. Dimensions 40x20x38mm, weight 85g.

131,59 €

inkl. 20% USt. , (Paket XS)

Muss bestellt werden. Ab Bestellung lieferbar in 7 Tagen.
Lieferzeit: 8 - 9 Werktage (AT - Ausland abweichend)

Super high torque/high speed waterproof programmable digital standard 85g brushless servo with a magnetic encoder, quadruple BB-ed hardened steel gears. Works great in large/giant planes, helicopters, 1:8-1:5 off-road RC cars, speed boats, sailboats etc. An waterproof/dustproof (IP67 standard) all-aluminium case for perfect cooling under high load and thorough protection.

GO-1088MGW is programmable using the KAVAN GO servo USB programmer/interface and PC software.

Programmable Functions

Servo Angle: Maximal servo rotation angle range setting. The default range is ca 120° within the regular RC signal pulse width range (900~2100 µs); ca 180° within the max. signal pulse width range (500~2500 µs).
Servo Neutral: Servo neutral (centre) position setting.
Damping Factor: Servo damping setting – adjust the characteristics of the servo when stopping.
PWM Power: Adjusts the servo output power. The higher the power, the higher the speed and torque of the servo – indeed also the current consumption will be higher.
Sensitivity: Servo sensitivity (Dead Band) setting. The higher sensitivity the narrower the dead band – servo moves only if the change of the signal pulse width is bigger than the dead band width. Too high setting may cause servo jitter in some applications. Range: Ultra High (ca 1 µs dead band) – High (ca 2 µs) – Medium (ca 3 µs) – Low (ca 4 µs)
Soft Start: Turns on/off the soft start feature. If ON, the servo goes slowly to the initial position corresponding to the servo signal once the power is switched on.
Reverse: Reverses the servo movement direction.
Narrow Band: FUTABA SR Mode – only for use with FUTABA radio channels working in the SR mode. Do not turn the option on if you are using a different setting of your FUTABA radio or any other radio.
SANWA SSR: SANWA SSR Mode - only for use with SANWA radio channels working in the SSR mode. Do not turn the option on if you are using a different setting of your SANWA radio or any other radio.
Lost PPM Protection (Fail-Safe): In the case the control signal from the receiver is lost completely or cannot be decoded correctly (due to interference) the servo can use choose one of three fail-safe modes:

(a) Release: No fail-safe protection.
(b) Keep Position: Keeps the position corresponding to the last correct control signal.
(c) Go Neutral Position: The servo returns to the neutral (1500 µs pulse width) position.

Over Load protection: Enables or disables overload protection of the servo in three levels – once the overload conditions last for the pre-set time (in seconds), the output power of the servo is reduced to the corresponding pre-set level (% of the max. power).
Default: Restores the factory default setting of the connected servo.

Wide input voltage range 4.8-8.4 V (nominal).

25T/5.92 mm output shaft.

Servo dimensions	Standard
Servo type	Digital
Programmable	Yes
Thrust at 4.8V [kg∙cm]	45
Thrust at 6.0V [kg∙cm]	55
Thrust at 7.4V [kg∙cm]	65
Thrust at 8.4V [kg∙cm]	74
Speed at 4.8V [s/60st.]	0.19
Speed at 6.0V [s/60st.]	0.165
Speed at 7.4V [s/60st.]	0.135
Speed at 8.4V [s/60st.]	0.125
Servo gears	Metal
Ball bearings	4x
High-voltage	Yes
Power supply [V]	4.8 - 8.4
Length [mm]	40
Width [mm]	20
Height [mm]	38
Weight [g]	85
Intended for	Aeroplanes,Helicopters,On-road cars,Off-road cars,Sailing boats,Boats
Water resistance	Waterproof

Länge [mm]:	40
Gewicht [g]:	85
Breite [mm]:	20
Höhe [mm]:	38
Stromversorgung [V]:	4.8 - 8.4
Servogröße:	Standard
Servotyp:	Digital
Geschwindigkeit bei 4.8V [s/60st.]:	0.19
Servo-Getriebe:	Metall
Kugellager:	4x
Hochvolt:	Ja
Bestimmt für:	Flugzeuge.Hubschrauber.Straßenautos.Geländewagen.Segelschiffe.Schiffe
Programmierbar:	Ja
Stellkraft mit 4.8V [kg∙cm]:	45
Stellkraft mit 6.0V [kg∙cm]:	55
Geschwindigkeit bei 6.0V [s/60st.]:	0.165
Geschwindigkeit bei 8.4V [s/60st.]:	0.125
Stellkraft mit 7.4V [kg∙cm]:	65
Stellkraft mit 8.4V [kg∙cm]:	74
Geschwindigkeit bei 7.4V [s/60st.]:	0.135
Wasserbeständigkeit:	Wasserdicht